Saturday, November 21, 2026

USING UP MORE RETIRED DSP


Rita Homes' November 17 video on Facebook.  I'm sorry she didn't have a .pdf for this one.  The card is based on a 5 1/2" x 4 1/4" piece of cardstock.  The flaps are attached to that base before the inside pieces are adhered.    If you are interested in dimensions, I can go back to the video and get them for you if you are not on Facebook to get the information yourself.  It's a fun card to make but I do still prefer a card that will stand up after it has been made.


Thank you for coming by today!


Friday, November 20, 2026

JUST A SIMPLE LAYOUT


I don't think this cad needs a lot of explanation.  The measurements for the layers are:

Mat: 5 1/4" x 4"
Squares: 2 1/2" x 2 1/2" (Cut 2)
Rectangles 2 1/2" x 1 1/4" (Cut 2)


I had enough of the dsp to make a vertical version of the same card.  I had white rectangles left from the cards I made a few days ago and this large sentiment worked well on one of them.

I've been busy the last few days making what I hope is the last of the Christmas cards for the three care centers.  I need to do a count but I think I've finished the 150 that I need.  YAY!  Now I can concentrate on making the rest of the cards that we send from my husband and I.

Thank you for coming by today!

 

Thursday, November 19, 2026

NOVEMBER 10 VIDEO FROM RITA HOLMES


I've made this basic fancy fold several times but use a belly band to close everything.  I'm afraid I cannot easily explain the way this card closes, but I can get a .pdf for you if you would like to try.

I chose the piece of brown "music" dsp for the left hand panel because there was a brown pinecone on the piece next to it.  However, the focal point of the card ended up covering it up.  I was wishing I had chosen a brighter piece for that panel.


Opened.

Thank you for coming by today!

 

Wednesday, November 18, 2026

VERY SIMPLE CARD TO MAKE


These are the first two cards I did.  I got the idea on Pinterest.  I cut pieces of dsp that were slightly bigger than the rectangle cut out from the frames.  (Another way to use up small pieces of dsp.)  Everything was adhered with no dimensionals.  I lowered the sentiment on the right hand card to reveal the snowflake design on the dsp.  


For this card, I added the sentiment with dimensionals.


Thank you for coming by!

 

Tuesday, November 17, 2026

A FACEBOOK "MEMORY" FROM 11/9/24


On November 9th (2026), one of the memories that popped up on my Facebook page was a video that Rita Holmes had on November 9, 2024 - a "Simple Saturday" card.  I don't remember seeing it and decided to do one with the little scraps from the "All is Calm" dsp I have been trying to use up. I like the way it came out and may decide to make some more.

Thank you for coming by today!

 

Monday, November 16, 2026

POPPY STAMPS SNOWFLAKE


This is the Fractal Snowflake from Poppy Stamps.  It makes a great focal point for Winter/Holiday cards.  Once again I used scraps from the "All is Calm" retired SU dsp.

Thank you for coming by today!


 

Sunday, November 15, 2026

STAMPIN' UP! SNOWFALL THINLET DIES


In an effort to use leftover pieces of dsp from past years, I made this card.  I believe the dsp is called "All is Calm".  The beautiful snowflake was die cut using two of the dies in the set.  The smaller one was added to the larger one with dimensionals.

I'm not sure whether to leave the card as it is or add a sentiment at the bottom.  What do you think?

Thank you for coming by today!

 

Saturday, November 14, 2026

SUNNY DAY STAMPING on YouTube


I watched several videos on YouTube trying to find CAS Christmas cards for two care centers.  (Much to my surprise I actually have more than enough cards left from last year for the third center!)

One of the videos I watched was from Sunny Day Stamping and she had this very simple layout using the two squares.......actually three counting the mat for the larger one.  It sounded quick and easy.  I think I spent more time on this one than I do on some other more involved ones.  I had the dsp out that I wanted to use but then what???  I made the card with just the squares on the green card stock but then a few days later I decided it was way too plain.  I added the stamped leaves and now wonder if I should have just left it alone.

Sunny's idea seemed to work for her but I'm not at all satisfied with my card,

Thank you for coming by today!



 

Thursday, November 12, 2026

FUN FOLD WINTER SCENE


This paper is from a retired "One Horse Open Sleight" 6 x 6 package of dsp from Stampin' UP!.  The package had great papers to make cards with this fun fold.  A sentiment will be added when I get my Christmas stamps out.

Thank you for coming by today!

Wednesday, November 11, 2026

JUST ADD SOME LITTLE BUNNIES


 I still need to add a sentiment to finish this card.

Thank you for coming by today!

Monday, November 9, 2026

SLEIGH RIDE


 A more colorful version of the card I posted on Saturday.

Thank you for coming by today!

Saturday, November 7, 2026

BEGINNING CHRISTMAS CARDS


I'm not sure if I had done any cards in the past with the One Horse Open Sleigh piece, but I had pulled it out of my supplies with several other sets.  I stamped, colored and die cut it.  I already had am embossed piece with the evergreen trees.  I die cut the "snow" pieces on glitter paper and added a die cut white tree (which doesn't show up well here).  Once the pieces were assembled I added it to a Pretty Peacock card base.


Inside

Thank you for coming by today!

 

Friday, November 6, 2026

USING EVERYDAY HAPPINESS DSP


I can't remember what this type of fold is called but when I pulled out this paper and did a search on Pinterest, I saw one made basically like this.  I did end up cutting a deeper angle from what I understood she did.  Actually you don't really need to have a measurement other than the width of the card and the scoring measurements.  The directions she gave does not have equal size sections but it still works.  


I wasn't satisfied with the deep angle of this card so I made a second one shown below.  I am much happier with it.





The first and second card side by side.

Thank you for coming by today!

Thursday, November 5, 2026

EVERYDAY HAPPINESS DSP


I really like the colors for this dsp and haven't used it enough.  I had it out for a card I was working on which I will post tomorrow.  I decided to post this one first because it is using the same layout as the one I posted yesterday using the idea from Rita Holmes.  It's a fun layout using those three squares.

Thank you for coming by today!



 

Wednesday, November 4, 2026

USING 2" SQUARES



Yesterday Rita Holmes did a live video on Facebook using three coordinating 2" squares.  I pulled out a pack of paper and there were several 2" wide strips so all I had to do was cut off a square of each.  The flowers are from an unbranded set I have had for a very long time.  They worked really well with this layout.  The arrangement was made on an embossed piece that I had done at an angle.  I really like it done this way.

Thank you for coming by today!

Tuesday, November 3, 2026

STAMPIN' UP! "CUTEST CREW"


One of our granddaughters is having a birthday next week.  I doubt very much that she looks at my blog so I decided to post it early.  When I saw "The Cutest Crew" set from Stampin' Up! I decided to buy it because I don't have a lot of fun sets.  Also they have a Shitz Shu named Ellie and some of these puppies look a little like her.  I'm not sure what the breed is of the other dog but the figure in the middle was as close as I could come for Bo.  The layout for the card came from one I saw on Pinterest and I have added a picture of it at the end of this post.


The inside is actually also Very Vanilla card stock although the lighting looks yellowed.    I can't wait to give the card to Abby to see what she says.


Thank you for coming by today!

 

Monday, November 2, 2026

AN EASEL CARD


I really don't remember if I have ever made an easel card before.  I have hesitated to make one to send because I'm not sure if the person would know that it stands up.  However, yesterday I decided to give it a try. I'll save this birthday card to send to someone who is probably another cardmaker.


Thank you for coming by today!

 

Sunday, November 1, 2026

STORYBOOK FRIENDS


I don't often remember to watch Rita Holmes "Simple Saturday" videos but I happened to check it out yesterday.  I think I have made this fold before but it has been a long time so I decided to give it a try.  

This is my second card.  You can see my first attempt below.  I have 18 drawers of papers in three rolling carts.  Sometimes I just pull out a random drawer and take the first paper that is on top.  That's how I chose the paper for this card.  The big bunny was already waiting to be used.  I fussy cut the little bunny with the radish and the cluster of flowers to create a little scene on the front.  There had been some little radishes next to the small bunny so I saved that piece and added it to the inside.


Rita had stamped things on the outside and inside which meant she added a piece of white to the back side of the card.  I didn't think I needed that.  When I had watched most of the video, I thought I knew what to do so I did pull out some Christmas paper to do a trial run.  I had mistakenly assumed that the inside square would be attached directly behind the front square.  I was wrong!  Below is the unfinished card.



Because I had added the inside square in the wrong place,   I added a strip of dsp to the left side.  The card will still get finished but I didn't have the Christmas stamps out yet.

Thank you for coming by today!



 

USING UP MORE RETIRED DSP

Rita Homes' November 17 video on Facebook.  I'm sorry she didn't have a .pdf for this one.  The card is based on a 5 1/2" x...